Hobart 500554 Handler 190 MIG 230V Welder Manufacturer RFB

  • Model: Hobart
  • SKU: 500554
Hobart 500554 Handler 190 MIG 230V Welder Manufacturer RFB

Extended Warranty Options

  • Details
  • Details
  • Details
Warranty has been added in!
59900

In Stock
/  376 Sold
Ships same day
If ordered by 3PM ET
  • Free Shipping Options Available
  • Price Match On Most Items
  • Manufacturer Direct
  • Exceptional Customer Service
  • Free Replacement Shipping
To place an order over the phone or for immediate assistance, please call (888) 978-4993. For after hours sales please call (888) 999-1522.

 

Manufacturer Refurbished One year limited factory warranty
Manufacturer Refurbished 100% certified refurbished by the manufacturer
Manufacturer Refurbished Ships directly from Hobart
Manufacturer Refurbished Includes all original accessories
Manufacturer Refurbished Authorized Hobart dealer
Manufacturer Refurbished Free shipping


Refurbished units are clean condition and most look brand new, but some may have some minor dings.  Most are unused returns that have never been fired up except during testing.   If there has been prior use, it is very minimal.  Our welders are manufacturer refurbished by Hobart.  All units are fully tested for performance and guaranteed to work like new.  They come with a one year manufacturer's warranty.


 

What's In the Box:

  • Comfortable 10 ft. (3 m) H100S4-10 gun
  • Owner's manual with installation, operation and maintenance guidelines
  • 10 ft. (3 m) work cable with clamp
  • Built-in gas solenoid valve and dual-gauge regulator with gas hose.
  • Spool hub assembly accommodates 4 or 8 in. spools
  • Sample spool of .030 in (0.8mm) self-shielding flux-cored wire
  • .030 in. (0.8mm) contact tips
  • Quick Select™ drive roll for .024 in (0.6mm) or .030/.035 in. (0.8/0/9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
  • Power cord with plug
  • Welding guide and material thickness gauge
  •  

    Features:

    7 voltage selections, enhanced magnetics and infinite wire feed speed control
    Offers easier fine control of the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up.
    Accepts uncomplicated, easy-to-install direct plug-in SpoolRunner 100 spool gun
    Spool guns enhance feedability and reduce "bird-nesting" associated with soft aluminum wires.
    Integrated spool gun control circuitry is standard
    No additional control box or adaptor is required to connect the SpoolRunner 100 spool gun.
    Door chart with initial settings
    Quickly reference initial settings for different wires, gases, materials and thicknesses. Provides quick starting point for novices and professionals alike.
    Built-in contactor
    Eases use and excellent safety feature which makes wire electrically "cold" until trigger is pulled.
    Industrial cast aluminum wire drive system
    Professional and durable wire feed performance.
    Convenient polarity changeover with tip holder
    Access makes it quick and easy to change polarity for solid or tubular wire. Includes convenient storage holes for spare tips.
    Quick Select drive roll
    Makes setup quicker by offering three grooves - two for different size solid wires and a third for flux-cored wire.
    Short circuit protection
    Protects unit against current overload.
    Self-resettng thermal overload
    Protects power transformer to ensure reliability.
    Self-resetting motor protection
    Protects wire feed system from overload, no fuses to change or circuit breaker buttons to reset.

       

      Specifications:

      PROCESSES

      Flux Cored (FCAW)
      MIG (GMAW)

      GENERAL SPECIFICATIONS

      Title Handler® 190 MIG Welder
      Material Thickness Mild Steel 24 ga. (0.8 mm) - 5/16 in.
      Weldable Metals Aluminum
      Stainless Steel
      Steel
      Input Voltage 220/230/240 V
      Input Phase 1-Phase
      Current Type DC
      Rated Output 30% @ 130A
      Amperage Range 25 A - 190 A
      Wire Feed Speed 40 IPM - 740 IPM
      Weld Output CV
      Net Width 10.625 in
      Net Height 12.375 in
      Net Length 19.5 in
      Net Weight 68 lbs
      Warranty 2 Years

       

      This Factory Reconditioned Limited Warranty applies to all factory reconditioned Hobart welding equipment and plasma cutters with a serial number preface of MC or newer. This limited warranty supersedes all previous factory reconditioned Hobart warranties and is exclusive with no other guarantees or warranties expressed or implied. Hobart factory reconditioned products are serviced by Hobart or Miller Authorized Service Agencies.

      LIMITED WARRANTY − Subject to the terms and conditions below, Hobart Brothers Co., Troy warrants to its original purchaser that factory reconditioned Hobart equipment sold after the effective date of this limited warranty is free of defects in material and workmanship at the time it is shipped by Hobart. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. Within the warranty periods listed below, Hobart/Miller will repair or replace any warranted parts or components that fail due to such defects in material or workmanship. Hobart/Miller must be notified in writing within thirty (30) days of such defect or failure, at which time Hobart/Miller will provide instructions on the warranty claim procedures to be followed. Hobart/Miller shall honor warranty claims on warranted factory reconditioned equipment listed below in the event of such a failure within the warranty time periods. All warranty time periods start on the delivery date of the equipment to the original purchaser, and not to exceed one year after the equipment is shipped to a North American retailer.

      1. 2 Years — Parts and Labor

      * Original Main Power Rectifiers only to include SCRs,diodes, and discrete rectifier modules

      * Reactors

      * Stabilizers

      * Transformers

      2. 1 Years — Parts and Labor

      * Drive Systems

      * Idle Module

      * PC Boards

      * Rotors, Stators and Brushes

      * Solenoid Valves

      * Spot Welder Transformer

      * Switches and Controls

      3. 1 Year — Parts and Labor Unless Specified

      (90 days for industrial use)

      * Accessories

      * Batteries (Trek 180 Only)

      * Contactors

      * Field Options

      * Flowgauge and Flowmeter Regulators (No Labor)

      * HF Units

      * MIG Guns/TIG Torches

      * Plasma Cutting Torches

      * Regulators

      * Relays

      * Remote Controls

      * Replacement Parts (No labor) − 90 days

      * Running Gear/Trailers

      * Water Coolant Systems

      4.90 days – Parts and Labor

      * Motorized guns

      5. Engines, batteries (except Trek 180) and tires are warranted separately by the manufacturer.

      Hobart's Factory Reconditioned Limited Warranty shall not apply to:

      1. Consumable components; such as contact tips, cutting nozzles, contactors, brushes, relays, work station table tops and welding curtains, or parts that fail due to normal wear. (Exception: brushes and relays are covered on all engine-driven products.)

      2. Items furnished by Hobart/Miller, but manufactured by others, such as engines or trade accessories. These items are covered by the manufacturer's warranty, if any.

      3. Equipment that has been modified by any party other than Hobart/Miller, or equipment that has been improperly installed, improperly operated or misused based upon industry standards, or equipment which has not had reasonable and necessary maintenance, or equipment which has been used for operation outside of the specifications for the equipment.

      Customer Reviews

      No reviews yet
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      Used & Refurbished

      Thousands of units sold with very happy customers and feedback

      Used & Refurbished

      Refurbished products come directly from the manufacturer, so you can be certain of the quality

      Used & Refurbished

      Refurbished products are restored by the manufacturer to the same rigorous standards as those set for new products

      Used & Refurbished

      We offer extended in-home warranties that can be longer than the manufacturer warranty for new items

      Used & Refurbished

      Each unit is individually tested for performance, whereas only a small subset of new units are tested


      Sale

      Unavailable

      Sold Out

      x