Hobart 500551 Handler EZ-TIG 165i AC/DC TIG 230V Welder Manufacturer RFB
- Model: Hobart
- SKU: 500551
- Free Shipping Options Available
- No Sales Tax *Except TX*
- Price Match On Most Items
- Manufacturer Direct
- Exceptional Customer Service
- Free Replacement Shipping
 |
Two year limited factory warranty |
|
100% certified refurbished by the manufacturer |
|
Ships directly from Hobart |
|
Includes all original accessories |
|
Authorized Hobart dealer |
|
Ships out same or next day |
Refurbished units are clean condition and most look brand new, but some may have some minor dings. Most are unused returns that have never been fired up except during testing. If there has been prior use, it is very minimal. Our welders are manufacturer refurbished by Hobart. All units are fully tested for performance and guaranteed to work like new. They come with a one year manufacturer's warranty.
The EZ-TIG 165i is a complete 230V AC/DC welding package that offers a unique single knob control making it the quickest and easiest AC/DC TIG welder to set up and use. Just plug it into 230 VAC, connect the gas, select the material and thickness, and you are ready to weld. It has superior weld performance from 22 gauge to 3/16 in. (.81 mm to 4.8 mm) in both AC (aluminum) and DC (steel/stainless steel/chromoly). The EZ-TIG 165i is a light weight inverter-based design that includes a foot control.
What's In the Box:
- EZ-TIG 165i inverter-based power source with primary cord and plug attached
- 12.5 ft (3.8 m) Legacy 17 Weldcraft TIG torch
- RFCS-RJ45 Remote Foot Control
- 12 ft. (3.7 m) work cable with clamp
- Gas regulator/flowmeter and shielding gas hose
- Owners manual
Features:
| Comes complete with: |
|
||
|---|---|---|---|
| Power: |
|
||
| Processes: |
|
||
| Material Thickness: | Welds 22 gauge to 3/16 inch in both AC (aluminum) and DC (steel/stainless steel/chromoly). | ||
| Skill Level: | High | ||
| Applications: |
|
- EZ to use interface with one knob and one switch control
- AC output for superior aluminum welding, DC output for mild and stainless steel
- Fan-On-Demand to only have the fan run when needed reducing dust/debris being pulled into the unit
- Infinite amperage control for broader operating range with finer control
- Inverter-based power source provides a more consistent welding arc while using less power
- Weighs only 50 lb. (23 kg) so it's EZ to take anywhere
- HF start to allow for a non-contact arc start to eliminate tungsten and material contamination
- Auto-postflow to provide optimum shielding based on welding amperage without waste or need for adjustment
- Automatic high temperature 1shutdown
Specifications:
| Stock Number | #500551 230 V , 60 Hz with Foot Control | |||
|---|---|---|---|---|
| Rated Output at 20% Duty Cycle | 150 A at 16 VAC 150 A at 16 VDC |
|||
| Welding Amperage Ranges AC/DC | 10 - 165A | |||
| Max. Open-Circuit Voltage | 80 V | |||
| Amps Input at Rated Output | AC-230V: 21A DC-230V: 23A |
|||
| Dimensions | H: 17 in (433 mm) W: 9 7/8 in (251 mm) D: 23 7/8 in (608 mm) |
|||
| Net Weight | 50 lb (23 kg) | |||
This Factory Reconditioned Limited Warranty applies to all factory reconditioned Hobart welding equipment and plasma cutters with a serial number preface of MC or newer. This limited warranty supersedes all previous factory reconditioned Hobart warranties and is exclusive with no other guarantees or warranties expressed or implied. Hobart factory reconditioned products are serviced by Hobart or Miller Authorized Service Agencies.
LIMITED WARRANTY − Subject to the terms and conditions below, Hobart Brothers Co., Troy warrants to its original purchaser that factory reconditioned Hobart equipment sold after the effective date of this limited warranty is free of defects in material and workmanship at the time it is shipped by Hobart. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. Within the warranty periods listed below, Hobart/Miller will repair or replace any warranted parts or components that fail due to such defects in material or workmanship. Hobart/Miller must be notified in writing within thirty (30) days of such defect or failure, at which time Hobart/Miller will provide instructions on the warranty claim procedures to be followed. Hobart/Miller shall honor warranty claims on warranted factory reconditioned equipment listed below in the event of such a failure within the warranty time periods. All warranty time periods start on the delivery date of the equipment to the original purchaser, and not to exceed one year after the equipment is shipped to a North American retailer.
1. 2 Years — Parts and Labor
* Original Main Power Rectifiers only to include SCRs,diodes, and discrete rectifier modules
* Reactors
* Stabilizers
* Transformers
2. 1 Years — Parts and Labor
* Drive Systems
* Idle Module
* PC Boards
* Rotors, Stators and Brushes
* Solenoid Valves
* Spot Welder Transformer
* Switches and Controls
3. 1 Year — Parts and Labor Unless Specified
(90 days for industrial use)
* Accessories
* Batteries (Trek 180 Only)
* Contactors
* Field Options
* Flowgauge and Flowmeter Regulators (No Labor)
* HF Units
* MIG Guns/TIG Torches
* Plasma Cutting Torches
* Regulators
* Relays
* Remote Controls
* Replacement Parts (No labor) − 90 days
* Running Gear/Trailers
* Water Coolant Systems
4.90 days – Parts and Labor
* Motorized guns
5. Engines, batteries (except Trek 180) and tires are warranted separately by the manufacturer.
Hobart's Factory Reconditioned Limited Warranty shall not apply to:
1. Consumable components; such as contact tips, cutting nozzles, contactors, brushes, relays, work station table tops and welding curtains, or parts that fail due to normal wear. (Exception: brushes and relays are covered on all engine-driven products.)
2. Items furnished by Hobart/Miller, but manufactured by others, such as engines or trade accessories. These items are covered by the manufacturer's warranty, if any.
3. Equipment that has been modified by any party other than Hobart/Miller, or equipment that has been improperly installed, improperly operated or misused based upon industry standards, or equipment which has not had reasonable and necessary maintenance, or equipment which has been used for operation outside of the specifications for the equipment.
