Hobart 500565 AirForce 27i 240V 27 Amp Plasma Cutter Manufacturer RFB
Manufacturer: Hobart
SKU: 500565R
Share
QTY
$ 1,099.00
This item ships for free. Freight shipments include liftgate at no additional charge.
Exceptional Customer Service
Manufacturer Direct
Similar Products
Hobart 500565 AirForce 27i 240V 27 Amp Plasma Cutter Manufacturer RFB
Share
Product Overview
Need to cut steel? Thinking about an oxy acetylene cutting torch to do the job? Consider a plasma cutter. This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals. The AirForce™ 27i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. This power source adapts to your work site by operating from either 120V or 240V power through standard household outlet using the Multi-Voltage Plug (MVP).
Refurbished units are clean condition and most look brand new, but some may have some minor dings. Most are unused returns that have never been fired up except during testing. If there has been prior use, it is very minimal. Our welders are manufacturer refurbished by Hobart. All units are fully tested for performance and guaranteed to work like new. They come with a one year manufacturer's warranty.
2 year limited factory warranty
Includes all original accessories
Manufacturer refurbished
Ships directly from Hobart out of WI
Authorized Hobart dealer
Features
- Inverter Design - Powerful cutting ability at half the weight of prior model (AirForce 400). Weighs only 27.8 lbs.
- Capable with Engine-Driven Welders - Complete cutting capability when powered by an engine-driven welder with a 240 V generator power outletof 6 kW or more.
- New High-Performance Ergonomic Torch - The new XT30R torch is designed for increased comfort, more efficient cooling and longer lasting cutting tips.
- Multi-Voltage Plug (MVP) - Allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle
- Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
- Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
- Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.
- Thermal Overload Protection - Built to withstand tough working environments. Rated for 35% duty cycle at 104° Fahrenheit. Duty cycle will increase as environmental temperature decreases.
- Line Voltage Compensation (LVC) - Provides peak performance power under variable input voltage conditions (±15%) for steady and cleaner ending cuts.
- Power Factor Correction - Expands operator’s work area via extension cords while minimizing nuisance trips caused by voltage drops.
Specifications
| Rated Output at 35% Duty Cycle | 240 V - 27 A, 92 VDC / 120 V - 20 A, 88 VDC |
| Max. Open-Circuit Voltage | 400 V |
| Rated Output 60 Hz | 120V (15 A) 20.6 / 120V (20 A) 28.8 / 240V 13.9 |
| Plasma Gas Flow/Pressure | 3.0 CFM (85 L/min) at 90-120 PSI (621–827 kPA) recommended |
| Dimensions | H- 11-1/4 in. (286 mm) / W- 8-1/4 in. (210 mm) / D- 14-1/4 in. (362 mm) |
| Net Weight 27i w/torch | 27.8 lb (12.6 kg) |
| Ship weight | 32.6 lb (14.8 kg) |
Package Contents
AirForce 27i plasma cutter
Tips
Electrode
Air fitting
10-ft. (3m) power cord with 5-15P (115V, 15 Amp) and 6-50P (230V, 50 Amp) MVP plugs
Deflector
Warranty
This item comes with a 2 year limited factory warranty.
