Hobart 500575 Airforce 27i 120/240V Plasma Cutter with XT30R Torch and MVP Power Cord System Manufacturer RFB
Manufacturer: Hobart
SKU: 500575R


Default Title
QTY
$ 1,199.00
$ 1,199.00
0

This item ships for free. Freight shipments include liftgate at no additional charge.
Sign up for restock notifications!
Similar Products
Sort:
Filter:
Price
Brand
-
Hobart 500553 Handler 210MVP MIG 115V/230V Welder New
$1,149
Features6 reviews -
Hobart 500559 Handler MIG 115V 140 Amp Welder New
$739
Features2 reviews -
Vevor Mig Welder 3 In 1 Combo Machine 270A MIG MMA TIG 110V/220V New
$226.99
Features2 reviews -
Hobart 500573 Handler 125 Flux-Cored 205V MIG Welder New
$449
FeaturesNo reviews
Customers Also Purchased

Hobart 500575 Airforce 27i 120/240V Plasma Cutter with XT30R Torch and MVP Power Cord System Manufacturer RFB
Product Overview
The Hobart AirForce® 27i Plasma Cutter With Multi-Voltage Plug is an economical plasma cutter system for all conductive metals. Inverter-based design features a multi-voltage plug (MVP) that allows a user to connect to common 120V or 240V power receptacles. The XT series torch and long life XT tips and electrodes provide added performance to an already exceptional plasma cutter.
Plasma cutters cut faster and more precisely with a thinner kerf and less slag than cutting with oxy fuel. A smaller heat-affected zone also causes less warping. And you'll never have gas pressure settings, flame tuning, metal preheating or gas cylinders or refills to worry about.
Refurbished units are clean condition and most look brand new, but some may have some minor dings. Most are unused returns that have never been fired up except during testing. If there has been prior use, it is very minimal. Our welders are manufacturer refurbished by Hobart. All units are fully tested for performance and guaranteed to work like new. They come with a one year manufacturer's warranty.



1 year limited factory warranty
Includes all original accessories
Manufacturer refurbished
Ships directly from Hobart out of WI
Authorized Hobart dealer
Features
- Dual-Voltage capability with MVP (Multi-Voltage Plug) allows you to connect to common 120 or 240V power receptacles without the use of any tools, simply choose the plug that fits the receptacle
- Clean cuts 3/8in. mild steel; severs steel up to 5/8in. thick
- XT30R torch is designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips
- Wind Tunnel Technology™ prevents abrasive dust and particles from damaging internal components
- Fan-On-Demand™ cooling system operates only when needed, reducing power consumption and contaminants drawn into the machine
- Power Factor Correction (PFC) circuitry draws up to 30% less amperage for the same cutting range when compared to the competition, expanding an operator's work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops
- Internal gas/air filter and regulator controls the amount of usage and flow, or air or gas
- Starts without high frequency protecting the unit by not interfering with or damaging controls or computers
- Diagnostics LED lights for quick troubleshooting of pressure, power and cup situations
- Postflow cooling circuit extends the life of consumables and torch by cooling them with postflow air after the trigger is released
- Compatible with engine-driven welders, delivering complete cutting capability when powered by an engine-driven welder/generator with 240V receptacle of 4 kW or more
- LVC™ line voltage compensation provides peak performance power under variable input voltage conditions (+/- 15%) for steady and cleaner-ending cuts
Specifications
Volts | 120/240 |
Compressor Included | No |
Amps | 14–30 |
Cutting Thickness (in.) | 3/8 (mild steel, clean cut) |
Sever Thickness (in.) | 5/8 |
Duty Cycle | 120V (15A) 20A at 88 VDC, 60% duty cycle; 120 V (20A) 27A at 92 VDC, 35% duty cycle |
Clamp Cable Length (ft.) | 12 |
Power Cord (ft.) | 12 |
Cart | No |
Dimensions L x W x H (in.) | 13 1/2 x 6 x 9 |
Ship Weight | 35.0 lbs |
Package Contents
12 ft. XT30R hand-held torch
12 ft. work cable with clamp
10 ft. power cord with 5-15P (120V, 15A) and 6-50P (240V, 50A) MVP™ Plugs
Easy-to-connect, built-in gas/air filter and regulator for extra protection
Extra consumables (2 tips, shield deflector, and electrode)
Cable management
Warranty



This item comes with a 1 year limited factory warranty.
Customer Reviews (1)
I was skeptical about buying a "refurbished" unit but it was $500 cheaper than new. It was in like new condition with all of the assesories and manuals. Cuts thru steel like a hot knife thru butter.
I'm very satisfied with my purchase!
Similar Products
Recently Viewed
-
Hobart 500575 Airforce 27i 120/240V Plasma Cutter with XT30R Torch ...
1 review$1,199.00
Please allow 5-8 business days for processing
-
DK2 AVAL8422ELT 84 x 22 in. Universal Truck Mount T-Frame Snow Plow...
1 review$2,199.99
Ships in 1-2 business days
SALE