Oransi Max HEPA Air Purifier New

Brand new & Manufacturer direct

Pre-Filter: The air first enters the pre-filter, capturing the largest particles, which enhances the filter life and performance of the other filters. The Max pre-filter is made of a durable material that allows you to easily vacuum if needed without worrying about damaging it.

High-Efficiency v-HEPA Filter: The most effective type of air filter at capturing dust, allergens and other solid particles. Effectively removes 99+% of airborne pollutant particles that pass through the system. This includes contaminant particles such as pollen, dust mites, smoke, and other airborne impurities as small as 0.3 micron. Unique low air flow resistance technology makes the HEPA air purifier more powerful and effective compared to other air purifiers. We also added a seal around the filter to ensure the air does not by-pass the filter. This further provides cleaner air.

Activated Carbon Filter: The best type of air filter for trapping chemicals, gases, odors, wildfire smoke and cigarette smoke. We've doubled the size of the carbon filter making it the best in class of air purifiers. According to Penn State Dept. of Aero-biological researchers, carbon filters serve to remove odors, volatile organic compounds (VOCs) and chemicals that other filters cannot.

Anion: The nano piezo-electric ions makes your room more like a natural environment. A Journal of Hygiene study found negative ions to improve efficiency of filter units and multiple studies (including those by the U.S. Dept. of Agriculture) have found to be highly effective against dust, etc. This feature can be turned on or off to meet your needs.

Night Mode: Don't want a bright light shining at night? Press and hold the power button for 3 seconds and the light around the power button will turn off. Press and hold the power button for 3 seconds to reactivate this light. Note: the blue lights in the center display (ie fan speed display) will remain illuminated but they are not very bright.

Intelligent Air Quality Monitor: gives you a visual indication of the air quality in your room from the front of the air purifier. If operated in auto mode the air quality monitor will adjust the fan speed depending upon the air quality reading. When first started the sensor may flash "AQS" for the first ten minutes. This is to indicate that the Air Quality Sensor is warming up and calibrating.

Troubleshooting: If the air purifier does not power on, remove the front cover and the filters and re-insert each. We have a safety switch that ensures that the filters are pressed all the way in and the cover is completely closed. In shipment the cover may open slightly or the filters may move a little. Also, if you press the Auto button, the fan speed display will reflect the air quality reading and not the current operating fan speed so there can be a difference. We suggest setting the fan speed where you would like it and then press Auto. If the sensor shows 0 or 1 bars the fan speed will show as Silent, 2 bars is Middle, 3 bars is Strong and 4 bars is Turbo.