Vevor Hydraulic Gear Puller 15-Ton 2 or 3-Jaw Bearing Wheel Hub Separator New
Manufacturer: Vevor
SKU: YYLM15TZTS0000001V0
QTY
(888) 999-1522
Apply for an immediate tax exemption and checkout with taxes removed from your order. Tax exemptions
will be validated and approved before shipping.
$ 78.90
+
FREE Shipping
×
This item ships for free. Freight shipments include liftgate at no additional charge.
In Stock
Most orders ship out the same or next business day
If ordered by 12 PM ET
Exceptional Customer Service
Authorized Dealer
Similar Products
COMPARE SIMILAR ITEMS
0 items match these filters.
Customers Also Purchased
-
Vevor Hydraulic Shop Press 6-Ton H-Frame Adjustable Floor Press New
-
Vevor Hydraulic Cylinder Jack 30 T Ram Stroke 4" Single Acting Hollow New
-
Vevor Carrier & Pinion Bearing Puller New
-
Vevor Air Hydraulic Pump 10,000 PSI Foot Operated with Hose and Spray Gun New
-
Vevor Hydraulic Cylinder Jack 20 Ton 4" Hollow Plunger New
-
Vevor Hydraulic Cylinder Jack 30 Ton 2" Hollow Plunger New
-
Vevor Wind Turbine Generator Kit 3-Blade with MPPT Controller 800W 12V New
-
Vevor Gear Puller Set 3"/4"/6"/8" 3-Jaw Bearing Puller Tool Kit New
-
Vevor Hydraulic Pressure Test Kit 5 Gauges 10/100/250/400/600 Bar New
-
Vevor 60 Ton Hydraulic Cylinder Jack 2" Ram Stroke Single Acting Hollow New
-
Vevor Strut Spring Compressor Set MacPherson Coil Extractor Tool Kit New
-
Vevor Wheel Hub & Bearing Remover & Installer Kit for FWD Vehicles New
-
Vevor Hydraulic Shop Press 12 Ton H-Frame Adjustable Height Heavy Duty New
-
Vevor Ball Joint Press Kit 25-Pc C-Press Remove and Install Tool Set New
-
Vevor Hydraulic Ram With Pump Car Jack 12 Ton Porta Power Kit With 4.6 ft Oil Hose And Storage Ca...
-
Vevor Hydraulic Flaring Tool Kit 45° Double Flaring Tool for 3/16"-1/2" Tubing New
Vevor Hydraulic Gear Puller 15-Ton 2 or 3-Jaw Bearing Wheel Hub Separator New
Product Overview
This hydraulic gear puller is built from premium steel and delivers up to 15 tons of pulling force for demanding removal jobs. It can be used in either 2-jaw or 3-jaw configurations and operated horizontally or vertically for added versatility. The design is suited for pulling hubs, flanges, gears, pulleys, flywheels, bearings, and similar components. A 360-degree rotary pump head, safety relief valve, and balanced three-jaw construction help provide easier operation and secure pulling. It is well suited for garages, repair shops, and mechanical maintenance work.
Brand new
1 year factory warranty
Manufacturer direct shipping from CA, NJ, & TX
Authorized Vevor Dealer
Features
- DURABLE MATERIAL: - The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time.
- ADJUSTABLE JAWS: - You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool.
- BIDIRECTIONAL OPERATION: - The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread.
- HUMANIZED DESIGN: - Equipped with a safety relief valve, the piston rod, the detachable ejector pin and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility. Three-jaw structure has the same load distribution, which can be securely clamped and concentrically pulled. The three-jaw gear puller evenly distributes the tension and protects the gear.
- DIVERSE SCENARIO: - A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc.
Specifications
| Model | YYLM15TZTS0000001V0 |
| Max Capacity | 15 tons / 33069 lbs |
| Jaws | 2 or 3 Adjustable |
| Axis Travel | 2" / 50 mm |
| Min/Max Reach | 0 - 7" / 0 - 180 mm |
| Min/Max Spread | 4" - 12" / 100 - 300 mm |
| Gross Weight | 26.4 lbs / 12 kg |
| Package Dimensions | 17.3" x 12.6" x 4.7" / 44 x 32 x 12 cm |
Package Contents
1 x Hydraulic Puller
1 x Handle
1 x 2/3 Leg Puller Yoke
3 x Jaws
6 x Link Plates
6 x Screw Sets
Warranty
This item comes with a 1 year factory warranty.
